Jaw Crusher

Jaw crusher is mainly used for medium-sized crushing of various ores and large materials, divided into coarse crushing and fine crushing. The PE, PEX, PEH series jaw crushers produced by our company have simple and reasonable structure, wide application, high production efficiency, easy operation and maintenance, and can crush ore and rock with compressive strength ≤ 320MPa. They often form a complete sand and gravel production line together with hammer crushers, cone crushers, impact crushers, sand making machines, etc. Widely used in mining, metallurgy, chemical industry, building materials, electric power, water conservancy, transportation and other fields.

Application scope: sand and gravel yard, mining, coal mining, concrete mixing station, dry mortar, power plant desulfurization, etc.

Applicable materials: granite, marble, basalt, limestone, river pebble, iron ore, copper ore, etc.

Scene Picture

Performance Characteristics

1. The crushing cavity is deep and has no dead zone, thus improving the feeding capacity and yield;

2. Simple structure, reliable work and low operating costs;

3. The crushing ratio is large and the product particle size is uniform;

4. The lubrication system is safe and reliable, the parts are easy to replace, and the maintenance workload is small;

5. Equipment energy saving: single machine energy saving is 15% ~ 30%, and the system energy saving is more than double;

6. The adjustment range of the discharge port is large, which can meet the requirements of different users;

7. Low noise and less dust.

Technical Parameters

Note: The above contents are for reference only. The actual samples shall prevail. The data in the table are subject to change without prior notice.

Works

Jaw crusher is simple. The material crushing is mainly completed by squeezing the moving and static jaws. The belt and pulley work under the drive of the motor. The eccentric shaft drives the moving jaw to move up and down. When the moving jaw is upward, the angle between the elbow plate and the moving jaw becomes larger. At this time, the moving jaw plate will squeeze the material close to the fixed jaw plate to achieve the purpose of crushing. When the moving, drain the machine cavity from the lower discharge port.