GX Doublewheel WashSand + Fine Sand Recovery Integrated Machine

GX series double wheelsand washing and fine sand recovery integrated machine, the machine combines the functions of sand washing, dehydration, and fine sand recovery, especially highlighting the sand washing function. The whole machine adopts tandem double impellers for sand washing operations, and the sand and gravel aggregate After the impeller is cleaned, the coarse sand is separated from the fine sand, mud, and water. After the coarse sand is cleaned and simply dehydrated, it enters the second impeller for re-cleaning. The secondary cleaning is more.

The machine adopts a more reasonable pipeline design and adds an overflow system to make the overflow state of fine sand and water more reasonable, increase the height of the under-screen water tank, improve the configuration of the screen machine, and greatly improve the performance of the whole machine, so that the quality of the finished sand Achieve a qualitative leap.

Application scope: sand washing, dehydration and fine sand recovery of sand and gravel aggregate

Applicable Material: Fine Sand

Processing capacity: 90-150 T/H

Feed particle size: ≤ 10mm

Performance Characteristics

1. The screen is made of polyurethane, which is resistant to impact, low temperature and chemical corrosion;
2. The motor is easy to replace. The rubber spring of the base is used for shock absorption, so that the amplitude is not large and the vibration is slow, which can be taken off cleanly;
3. The model can be customized according to the output and water content, and the discharge port is supported by triangular steel plate;
4. The sieve hole can be customized according to needs, the equipment has low noise and good dehydration effect.

Technical Parameters

Note: The above contents are for reference only. The actual samples shall prevail. The data in the table are subject to change without prior notice.

works

pump slurry sand-water mixture is transported to the mud and sand high-pressure separator, and the centrifugal graded concentrated tail sand is provided to the dewatering screen through the sand sink. After being dehydrated by the dewatering screen, the tail sand is effectively separated from the water, and a small amount of tail sand and mud are returned to the cleaning tank through the return box. When the liquid level of the cleaning tank is too high, it is discharged through the discharge port. The weight concentration of materials recovered from dewatering screen is 70%-85%. TuneFineness modulusmayis realized by changing the pump speed, changing the mortar concentration, adjusting the overflow water volume and replacing the mortar nozzle. So as to complete the three functions of cleaning, dehydration and grading.